The Woolich Racing Tuned software allows you to modify the original stock maps by writing your own tune data to the ECU. If you make some changes that you want to undo (eg. poor performance or engine light error) it is always possible to return the tuning, maps, settings, etc back to the stock condition. This means that all maps will be the same as they were when the bike came from the factory
At any time you can open a new stock bin file in the Woolich Racing Tuned software as follows:
- Click on the 'New' button
- Select your model, year, part number and click New
- Write the bin file to your ECU to return it back to the ECU's stock tuning and maps
- Note: This will NOT remove your Woolich Racing Bin File Key
You will be able to continue tuning and writing to the ECU after writing a stock file to your ECU. This is useful if you are having an unknown issue, and wish to remove all your changes from the ECU to troubleshoot.
Another useful alternative is to return a specific map back to stock, while leaving other maps unchanged, this is described below.
Putting a particular map back to stock:
If you just wish to put the values in any particular map back to stock values, you can also simply go to the 'Value Trim' tab on a map, select all your cells (Ctrl+A), click the 'Set' button and enter '0'. The Value Trim map shows your changes from the stock map, therefore setting all of the Value Trim cells to 0 will return it to the original values.
NOTE:
This is not to be confused with the 'Return to Stock' function found in the 'Tools' menu, which returns the ECU to 100% factory form and will remove the existing Bin File Definition Key from your ECU. This function is only to be used under the direction of the Woolich Racing Support Staff, ie. requested to use it in a Support Ticket.
Using Tools > Return to Stock removes all Woolich keys and code from the ECU including Race Tools keys. To write to the ECU again after using Return to Stock, you will need to purchase a new Bin File Key, Race Tools key, etc.
These Support Center articles may also be of interest to you: