The Woolich Racing Tuned software allows bin files to be written to a supported ECU, all supported ECU part numbers are listed both in the software as well as on the Woolich Racing website. If you have an ECU with a part number that is not yet supported, we can typically add support for it in a relatively short timeframe as long as we can read the bin file out of the ECU.
Some ECUs allow you to read the bin file yourself and then send it to us, some others do not allow this and will require you to send the ECU to us so that we can read the bin file and return the ECU.
When you open a stock bin file for a specific make/model/year in the Woolich Racing Tuned software you can see some information about the capability of the software to read these ECUs. Even if your ECU part number is not listed, you can open a stock bin file for the same make/model/year and the information shown will still be applicable.
In the example below a bin file for a 2009 CBR1000RR has been opened in the Woolich Racing Tuned software, we can then see the 'Bin File Details' which is applicable to all bikes that belong to this make/model/year. If the Bin File Details for your model shows 'Read Ok' (as in the image below), then you will be able to read the ECU part number yourself and submit the bin file to us to add to the software.
In this case you just need to open a bin file from the same make/model/year and then Read the ECU via the "Tools" > "Read ECU" menu item.
Once the software has read the bin file from the ECU it will prompt you to send the bin file to Woolich Racing. Please add the details of the ECU including Make, Model, Region and Part number and click the "Send" button. Please also Open a Support Ticket to inform us that a new part number has been submitted.
Once we receive the bin file, we will analyse it and add it to the Woolich Racing Tuned software ready for you to begin tuning. We will also notify you when this has been completed.
In very rare cases, the bin file definition will need to be developed which can take considerably more time. This may take a number of days, but please rest assured that it will receive our urgent attention.
*Note: Not all ECU's can be read via the main ECU connectors. If the bin file details shows the 'Read Type' as either 'Send in to Read' or 'Read after first write', you will need to contact us and send your ECU to us in order for us to read out your ECU and add your part number to the software.
These Support Center articles may also be of interest to you: