Woolich Racing Products

Select the Manufacturer, Model and Year.
Manufacturer	Model	Year

2015-2024 Kawasaki H2R USB M v3 Package	This package includes everything you need to start tuning your 2015-2024 Kawasaki H2R with our USB M v3. USB M v3 USB Cable Kawasaki Type 13b On Bike Harnesses Bin File Definition in the Woolich Racing Tuned software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$419.00 ex Sales Tax VAT
2015-2024 H2R Log Box (Mitsubishi) + Zeitronix ZT-3 Wideband Package	This package includes everything you need to start tuning your 2015-2024 Kawasaki H2R with our Log Box M v3 and Zeitronix ZT-3 Wideband O2 Sensor. Log Box M v3 USB Cable On board 2GB micro SD card Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit (12v relay, wires and connectors, O2 sensor bung etc) Kawasaki Harness Type 13b Bin File Definitions in Woolich Racing Tuned Software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$756.00 ex Sales Tax VAT
2015-2020 Kawasaki H2R Racetools	The Race Tools package allows you to add Autoblipper, Quickshifter and Launch Control to the Stock ECU. The package includes: High quality dual direction strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Kawasaki Race Tools Type 5 which allows the quickshifter to be plugged into the bikes wiring harness** Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Target maps are fully configurable per gear. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$509.00 ex Sales Tax VAT
2015-2024 H2R Stock Bin File Definitions	Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2015-2024 Kawasaki H2R View Full Product Details...	ex Sales Tax VAT
Barrel to 2 Pin Plug Bench Harness Power Supply Connector	This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector. View Full Product Details...	US$10.00 ex Sales Tax VAT
Kawasaki Harness Type 13b (KH13A/13B/13C + KEH13B/17B)	On Bike Harness for 2015-2020 Kawasaki H2/H2R. Allows connection between Woolich Racing v3 Interface and bike harness. Once this harness is installed it allows you to flash the ECU without pulling out the ECU. Includes: Kawasaki Harness Type 13 (Main) Kawasaki Extension Harness Type 13b * Some H2 models require the Kawasaki Harness Type 17b. Please contact us with your ECU part number so we can send you the correct harness. View Full Product Details...	US$52.00 ex Sales Tax VAT
Kawasaki Extension Harness Type 13b (KEH13B/17B)	The Kawasaki Extension Harness Type 13b is the 1 wire harness part of the Kawasaki Harness Type 13b that is left on the bike. You can purchase additional 13b Extension Harnesses to tune additional bikes. Includes: Kawasaki Extension Harness Type 13b View Full Product Details...	US$21.00 ex Sales Tax VAT
Kawasaki Bench Harness Type 13 (KBH13)	This bench flashing harness allows you to flash 2016-2020 ZX10R and 2015-2021 H2 / H2R ECUs when they are not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing Mitsubishi USB Interface. Note: this product requires the purchase of Bin Files for use with the Woolich Racing Tuned software View Full Product Details...	US$105.00 ex Sales Tax VAT
Woolich Racing Merchandise


There are no products for this model, please check back soon...