Woolich Racing Products

Select the Manufacturer, Model and Year.
Manufacturer	Model	Year

2018-2022 Kawasaki Z400 USB (Denso) v3 Package	This package includes everything you need to start tuning your 2018-2022 Kawasaki Z400 with our USB (Denso) v3 and Kawasaki Harness 1c. USB (Denso) v3 USB Cable Kawasaki Harness Type 1c Bin File Definition in the Woolich Racing Tuned software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$414.00 ex Sales Tax VAT
2023-2024 Kawasaki Z400 Log Box D-CAN v3 Package	This package includes the Log Box D-CAN v3, On Bike Harness and Bin File Definition allowing you to tune the 2023-2024 Kawasaki Z400 Log Box D-CAN v3 USB Cable On board 16GB micro SD card Universal Harness Type 3 Kawasaki Bench Harness Type 22 Bin File Definitions in Woolich Racing Tuned Software Kawasaki Bench Harness Type 22 is used for Read/Write ECU Universal Harness Type 3 is used for Engine Data and Diagnostics Note: This package does not include the Zeitronix ZT-3 Wideband O2 kit and associated installation hardware. If you would like the complete package with Wideband O2 please see our other product listing below. View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$630.00 ex Sales Tax VAT
2018-2022 Kawasaki Z400 Log Box (Denso) v3 + Zeitronix ZT-3 Wideband O2 Package	This package includes everything you need to start tuning your 2018-2022 Kawasaki Z400 with our Log Box (Denso) v3 and Zeitronix ZT-3 Wideband O2 Sensor Log Box (Denso) v3 USB Cable On board 16GB micro SD card Kawasaki Harness Type 1c Bin File Definition in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit O2 Sensor Bung View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$751.00 ex Sales Tax VAT
2023-2024 Kawasaki Ninja 400 / EX400 Log Box D-CAN v3 + Zeitronix ZT-3 Wideband O2 Package	This package includes everything you need to start tuning your 2023-2024 Kawasaki Ninja 400 / EX400 with our Log Box (Denso) v3 and Zeitronix ZT-3 Wideband O2 Sensor Log Box D-CAN v3 USB Cable On board 16GB micro SD card Universal Harness Type 3 Kawasaki Bench Harness Type 22 Bin File Definition in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit O2 Sensor Bung Kawasaki Bench Harness Type 22 is used for Read/Write ECU Universal Harness Type 3 is used for Engine Data and Diagnostics View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$872.00 ex Sales Tax VAT
2023-2024 Kawasaki Z400 Log Box D-CAN v3 + Zeitronix ZT-3 Wideband O2 Package	This package includes everything you need to start tuning your 2023-2024 Kawasaki Z400 with our Log Box (D-Can) v3 and Zeitronix ZT-3 Wideband O2 Sensor Log Box D-CAN v3 USB Cable On board 16GB micro SD card Universal Harness Type 3 Kawasaki Bench Harness Type 22 Bin File Definition in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit O2 Sensor Bung Kawasaki Bench Harness Type 22 is used for Read/Write ECU Universal Harness Type 3 is used for Engine Data and Diagnostics View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$872.00 ex Sales Tax VAT
2023-2024 Kawasaki Z400 Race Tools Package	The Race Tools package allows you to enable Quickshifter, Launch Control and Pit Speed Limiter in the Stock ECU. The package includes: High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Kawasaki Race Tools Harness Type 11 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. The quickshifter kills both fuel and ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM Pit Speed Limiter allows you to set the RPM to limit the speed while riding through the pits.* * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the stock O2 sensor plugs on the bike's harness, the stock O2 sensor should be removed from the bike and disabled in our software * Pit Speed Limiter harness sold separately Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$467.00 ex Sales Tax VAT
2018-2022 Kawasaki Z400 Launch Control Key	Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and also Ramp Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU. If you already have a Quickshifter or Air Shifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU. View Full Product Details...	US$210.00 ex Sales Tax VAT
2018-2022 Kawasaki Z400 Race Tools Package	The Race Tools package allows you to enable Quickshifter, Launch Control and Pit Speed Limiter in the Stock ECU. The package includes: High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Kawasaki Race Tools Harness Type 9 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. The quickshifter kills both fuel and ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM Pit Speed Limiter allows you to set the RPM to limit the speed while riding through the pits.* * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the stock O2 sensor plugs on the bike's harness, the stock O2 sensor should be removed from the bike and disabled in our software * Pit Speed Limiter harness sold separately Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$467.00 ex Sales Tax VAT
Pit Speed Limiter Harness	The Pit Speed Limiter harness is used with our Race Tools Package, it consists of a harness and water proof push button switch which allows you to limit the RPM of the bike in 1st gear while riding in the pits. You must have a Race Tool Package to use the Pit Speed Limiter Harness. The Pit Speed Limiter harness also includes a stainless steel bracket used to mount the button on the bike's switch gear. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$26.00 ex Sales Tax VAT
2018-2022 Kawasaki Z400 Bin File Definition	Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2018-2022 Kawasaki Z400. View Full Product Details...	ex Sales Tax VAT
Kawasaki Bench Harness Type 22 (KBH22)	The bench flashing harness allows you to flash the 2020-2023 Kawasaki Z900 / Z650 ECUs . The bench flashing harness comes with a 12v plug to be used in with a 12v power supply, and needs to be used in conjunction with the Woolich Racing Denso USB Interface. Note: this product requires the purchase of bin file definitions for use with the Woolich Racing Tuned software Note: If you are working with the EU Restricted ECU (48 pin ECU Plug), you will need the Kawasaki Bench Harness Type 23. View Full Product Details...	US$126.00 ex Sales Tax VAT
Universal Harness Type 3 (UH-3)	The Universal Harness Type 3 connects your Woolich Racing Log Box D-CAN to bikes with the newer red 6 pin OBD2 bike plug. View Full Product Details...	US$42.00 ex Sales Tax VAT
Barrel to 2 Pin Plug Bench Harness Power Supply Connector	This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector. View Full Product Details...	US$10.00 ex Sales Tax VAT
Kawasaki Diagnostic Converter Type 1 (KDC1)	The Kawasaki Diagnostic Converter Type 1, converts the opaque 4 pin Kawasaki Diagnostic Plug to the newer Euro 5 - 6 pin Red Diagnostic Converter. View Full Product Details...	US$21.00 ex Sales Tax VAT
Kawasaki Harness Type 1c (KH1B/1C/7/12 + KEH1C)	On Bike Harness to connect Bike to Interface Includes: Kawasaki Main Harness Type 1c Kawasaki Extension Harness Type 1c Note: this product requires the purchase of the relevant Bin File Definition/s to use with the Woolich Racing Tuned software View Full Product Details...	US$47.00 ex Sales Tax VAT
Kawasaki Extension Harness Type 1c (KEH1c)	The Kawasaki Extension Harness Type 1c is the 4 wire harness part of the Kawasaki Harness Type 1c that is left on the bike. You can purchase additional 1c Extension Harnesses to tune additional bikes. Includes: Kawasaki Extension Harness Type 1c View Full Product Details...	US$26.00 ex Sales Tax VAT
Kawasaki Bench Harness Type 16 (KBH16)	The bench flashing harness allows you to flash the ECU on the bench when not installed in the bike. The bench flashing harness comes with a 12v power supply plug and needs to be wired into a 12v power supply. View Full Product Details...	US$126.00 ex Sales Tax VAT
Woolich Racing Merchandise


There are no products for this model, please check back soon...