Woolich Racing Products

Select the Manufacturer, Model and Year.
Manufacturer	Model	Year

2004-2005 Kawasaki ZX10R USB (Mitsubishi) v3 Package	This package includes everything you need to start tuning your 2004-2005 Kawasaki ZX10R with our USB (Mitsubishi) and on bike harness allowing you to flash the ECU while it is still in the bike connected to the bike harness. Mitsubishi USB Interface USB Cable Kawasaki Type 6 On Bike Harness Bin File Definition in the Woolich Racing Tuned software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$408.00 ex Sales Tax VAT
2006-2007 Kawasaki ZX10R USB (Mitsubishi) v3 Package	This package includes everything you need to start tuning your 2006-2007 Kawasaki ZX10R with our USB (Mitsubishi) and on bike harness allowing you to flash the ECU while it is still in the bike connected to the bike harness. Mitsubishi USB Interface USB Cable Kawasaki Type 5 On Bike Harness Bin File Definition in the Woolich Racing Tuned software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$408.00 ex Sales Tax VAT
2008-2010 Kawasaki ZX10R USB (Mitsubishi) v3 Package	This package includes everything you need to start tuning your 2008-2010 Kawasaki ZX10R with our USB (Mitsubishi) and On Bike Harness. USB (Mitsubishi) v3 Kawasaki Type 2 On Bike Harness USB Cable Bin File Definition in the Woolich Racing Tuned software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$408.00 ex Sales Tax VAT
2011-2015 Kawasaki ZX10R USB (Mitsubishi) v3 Package	This package includes everything you need to start tuning your 2011-2015 Kawasaki ZX10R with our USB (Mitsubishi) v3. USB (Mitsubishi) v3 USB Cable Kawasaki Type 3a On Bike Harnesses Bin File Definition in the Woolich Racing Tuned software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$414.00 ex Sales Tax VAT
2016-2018 Kawasaki ZX10R USB M v3 Package	This package includes everything you need to start tuning your 2016-2018 Kawasaki ZX10R with our USB M v3. USB M v3 USB Cable Kawasaki Type 13a On Bike Harnesses Bin File Definition in the Woolich Racing Tuned software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$414.00 ex Sales Tax VAT
2019-2020 Kawasaki ZX10R USB M v3 Package	This package includes everything you need to start tuning your 2019-2020 Kawasaki ZX10R with our USB M v3. USB M v3 USB Cable Kawasaki Type 13a On Bike Harnesses Bin File Definition in the Woolich Racing Tuned software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$414.00 ex Sales Tax VAT
2021-2024 ZX10R Log Box M v3 Package	This package includes the Log Box M v3, On Bike Harness and Bin File Definition allowing you to tune the 2021-2024 Kawasaki ZX10R Log Box Mv3 USB Cable On board 16GB micro SD card Universal Harness Type 2 Bin File Definitions in Woolich Racing Tuned Software Note: This package does not include the Zeitronix ZT-3 Wideband O2 kit and associated installation hardware. If you would like the complete package with Wideband O2 please see our other product listing below. View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$504.00 ex Sales Tax VAT
2004-2005 ZX10R Log Box (Mitsubishi) + Zeitronix ZT-3 Wideband Package	This package includes everything you need to start tuning your 2004-2005 Kawasaki ZX10R with our Log Box (Mitsubishi) and Zeitronix ZT-3 Wideband O2 Sensor. Log Box (Mitsubishi) USB Cable On board 4GB micro SD card Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit (12v relay, wires and connectors, O2 sensor bung etc) Kawasaki Harness Type 6 Bin File Definitions in Woolich Racing Tuned Software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$746.00 ex Sales Tax VAT
2006-2007 ZX10R Log Box (Mitsubishi) + Zeitronix ZT-3 Wideband Package	This package includes everything you need to start tuning your 2006-2007 Kawasaki ZX10R with our Log Box (Mitsubishi) and Zeitronix ZT-3 Wideband O2 Sensor. Log Box (Mitsubishi) USB Cable On board 2GB micro SD card Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit (12v relay, wires and connectors, O2 sensor bung etc) Kawasaki Harness Type 5 Bin File Definitions in Woolich Racing Tuned Software View Full Product Details...	US$746.00 ex Sales Tax VAT
2008-2010 ZX10R Log Box (Mitsubishi) + Zeitronix ZT-3 Wideband Package	This package includes everything you need to start tuning your 2008-2010 Kawasaki ZX10R with our Log Box (Mitsubishi) and Zeitronix ZT-3 Wideband O2 Sensor. Log Box (Mitsubishi) USB Cable On board 2GB micro SD card Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit (12v relay, wires and connectors, O2 sensor bung etc) Kawasaki Harness Type 2 Bin File Definitions in Woolich Racing Tuned Software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$746.00 ex Sales Tax VAT
2011-2015 ZX10R Log Box (Mitsubishi) + Zeitronix ZT-3 Wideband Package	This package includes everything you need to start tuning your 2011-2015 Kawasaki ZX10R with our Log Box (Mitsubishi) and Zeitronix ZT-3 Wideband O2 Sensor. Log Box (Mitsubishi) USB Cable On board 2GB micro SD card Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit (12v relay, wires and connectors, O2 sensor bung etc) Kawasaki Harness Type 3a Bin File Definitions in Woolich Racing Tuned Software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$751.00 ex Sales Tax VAT
2016-2018 ZX10R Log Box (Mitsubishi) + Zeitronix ZT-3 Wideband Package	This package includes everything you need to start tuning your 2016-2018 Kawasaki ZX10R with our Log Box M v3 and Zeitronix ZT-3 Wideband O2 Sensor. Log Box M v3 USB Cable On board 2GB micro SD card Kawasaki Harness Type 13a Bin File Definitions in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) Kawasaki WidebandO2 Installation Kit Type 1: • RJ12 cable to connect Zeitronix to Log Box • Kawasaki Power Harness Type 1 • O2 sensor bung View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$751.00 ex Sales Tax VAT
2019-2020 ZX10R Log Box (Mitsubishi) + Zeitronix ZT-3 Wideband Package	This package includes everything you need to start tuning your 2019-2020 Kawasaki ZX10R with our Log Box M v3 and Zeitronix ZT-3 Wideband O2 Sensor. Log Box M v3 USB Cable On board 4GB micro SD card Kawasaki Harness Type 13a Bin File Definitions in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) Kawasaki WidebandO2 Installation Kit Type 1: • RJ12 cable to connect Zeitronix to Log Box • Kawasaki Power Harness Type 1 • O2 sensor bung View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$751.00 ex Sales Tax VAT
2021-2024 ZX10R Log Box (Mitsubishi) + Zeitronix ZT-3 Wideband Package	This package includes everything you need to start tuning your 2021-2024 Kawasaki ZX10R with our Log Box M v3 and Zeitronix ZT-3 Wideband O2 Sensor. Log Box M v3 USB Cable On board 4GB micro SD card Universal Harness Type 2 Bin File Definitions in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) Kawasaki WidebandO2 Installation Kit Type 1: • RJ12 cable to connect Zeitronix to Log Box • Kawasaki Power Harness Type 1 • O2 sensor bung View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$746.00 ex Sales Tax VAT
2019-2020 Kawasaki ZX10R Race Tools	The Race Tools package allows you to add Autoblipper, Quickshifter, Pit Speed Limiter, Engine Warm Up and Launch Control to the Stock ECU. The package includes: High quality dual direction strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Kawasaki Race Tools Type 5 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Target maps are fully configurable per gear. Pit Speed Limiter RPM can be configured. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. Engine Warm up parameters are fully configurable. ** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. ** The Pit Speed Limiter and Engine Warm Up requires the purchase of an additional Pit Speed Limiter Harness. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$509.00 ex Sales Tax VAT
2021-2024 Kawasaki Replacement Quickshifter/Autoblipper	This item includes a plug and play replacement for the stock quickshifter sensor. Kawasaki Race Tools Type 5 Shift Rod* * Please contact us if you are using race shift pattern or aftermarket rear sets. We can supply you with a different shift rod to suit your application. View Full Product Details...	US$452.00 ex Sales Tax VAT
2019-2020 Kawasaki ZX10R Race Tools Key Only	This item is for the Race Tools Key Only, it allows you to enable Woolich Racing Race Tools using the stock Shift Sensor. No Hardware is included with this item. The Race Tools package allows you to add Autoblipper, Quickshifter, Pit Speed Limiter, Engine Warm Up and Launch Control to the Stock ECU. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Target maps are fully configurable per gear. Pit Speed Limiter RPM can be configured. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. Engine Warm up parameters are fully configurable. ** The Pit Speed Limiter and Engine Warm Up, requires the purchase of an additional Pit Speed Limiter Harness. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$273.00 ex Sales Tax VAT
2008-2010 Kawasaki ZX10R Race Tools Package	The Race Tools package allows you to enable Quickshifter, Launch Control and Pit Speed Limiter in the Stock ECU. The package includes: High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Kawasaki Race Tools Harness Type 2 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. The quickshifter kills both fuel and ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM Pit Speed Limiter allows you to set the RPM to limit the speed while riding through the pits.* * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the stock Exhaust Valve plugs on the bike's harness, the stock Exhaust Valve should be removed from the bike and disabled in our software * Pit Speed Limiter harness sold separately Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$467.00 ex Sales Tax VAT
2011-2015 Kawasaki ZX10R Race Tools Package	The Race Tools package allows you to enable Quickshifter, Launch Control and Pit Speed Limiter in the Stock ECU. The package includes: High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Kawasaki Race Tools Harness Type 1 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. The quickshifter kills both fuel and ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM Pit Speed Limiter allows you to set the RPM to limit the speed while riding through the pits.* * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the stock Exhaust Valve plugs on the bike's harness, the stock Exhaust Valve should be removed from the bike and disabled in our software * Pit Speed Limiter harness sold separately. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$467.00 ex Sales Tax VAT
2016-2018 Kawasaki ZX10R Race Tools	The Race Tools package allows you to add Autoblipper, Quickshifter, Pit Speed Limiter, Engine Warm Up and Launch Control to the Stock ECU. The package includes: High quality dual direction strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Kawasaki Race Tools Type 5 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Target maps are fully configurable per gear. Pit Speed Limiter RPM can be configured. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. Engine Warm up parameters are fully configurable. ** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. ** The Pit Speed Limiter and Engine Warm Up requires the purchase of an additional Pit Speed Limiter Harness. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$509.00 ex Sales Tax VAT
2008-2010 ZX10R Launch Control Key	Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and also Ramp Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU. If you already have a Quickshifter or Air Shifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$210.00 ex Sales Tax VAT
2011-2015 ZX10R Launch Control Key	Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and also Ramp Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU. If you already have a Quickshifter or Air Shifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$210.00 ex Sales Tax VAT
2016-2018 Kawasaki ZX10R Race Tools Key Only	This item is for the Race Tools Key Only, it allows you to enable Woolich Racing Race Tools using the stock Shift Sensor. No Hardware is included with this item. The Race Tools package allows you to add Autoblipper, Quickshifter, Pit Speed Limiter, Engine Warm Up and Launch Control to the Stock ECU. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Target maps are fully configurable per gear. Pit Speed Limiter RPM can be configured. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. Engine Warm up parameters are fully configurable. * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the stock exhaust valve plugs on the bike's harness, the stock exhaust valve should be removed from the bike and disabled in the WRT software The Pit Speed Limiter and Engine Warm Up, requires the purchase of an additional Pit Speed Limiter Harness. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$273.00 ex Sales Tax VAT
2016-2020 Kawasaki ZX10R Launch Control Key	Purchase this item to allow you to enable the Woolich Racing Launch Control. Launch Control is part of the Race Tools package. If you have purchased the Race Tools package you do not need to purchase this key. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$210.00 ex Sales Tax VAT
Pit Speed Limiter Harness	The Pit Speed Limiter harness is used with our Race Tools Package, it consists of a harness and water proof push button switch which allows you to limit the RPM of the bike in 1st gear while riding in the pits. You must have a Race Tool Package to use the Pit Speed Limiter Harness. The Pit Speed Limiter harness also includes a stainless steel bracket used to mount the button on the bike's switch gear. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$26.00 ex Sales Tax VAT
Kawasaki Pit Speed Limiter Harness Type 1	The Kawasaki Pit Speed Limiter harness plugs into the bike's Exhaust Valve Plug and allows the rider to enable the Pit Speed Limiter and, where available, the Engine Warm Up feature. The Kawasaki Pit Speed Limiter has to be used in conjunction with the relevant Woolich Racing Race Tools package. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$47.00 ex Sales Tax VAT
2019-2020 Kawasaki ZX10R Stock Bin File Definitions	Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2019-2020 Kawasaki ZX10R View Full Product Details...	ex Sales Tax VAT
Kawasaki Diagnostic Converter Type 3 (KDC3)	The Kawasaki Diagnostic Converter Type 3 will be required with the KH5 or KH2 if the diagnostic plug is opaque instead of black on a few 2011 Kawasaki ZX14's or ZX10R 2008-2010. View Full Product Details...	US$21.00 ex Sales Tax VAT
Kawasaki Wideband O2 Installation Kit (Zeitronix) (Type 1)	Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Kawasaki models Includes: RJ12 cable for connecting ZT-3 to Woolich Racing Products Kawasaki Power Harness Type 1 O2 Stainless Steel Bung Adhesive Velcro for attaching ZT-3 to bike. View Full Product Details...	US$37.00 ex Sales Tax VAT
Universal Harness Type 2 (UH-2)	This Universal harness allows you to connect to the 6 pin Red Diagnostic Plug on the bike and read and clear fault codes and view Engine data using a USB D v3, Log Box D v3, USB M v3, Log Box M v3, USB M-Ducv3 and Log Box M-Ducv3 Note: USB v3 and Log Box v3 is not included. PLEASE NOTE - Universal Harness Type 2 (known previously as Kawasaki Data Harness Type 4) View Full Product Details...	US$42.00 ex Sales Tax VAT
Kawasaki Harness Type 5 (KH2/5/6)	The Kawasaki Harness Type 5 allows you to connect a Woolich Racing Mitsubishi USB Interface to the bike harness allowing the ECU to be flashed while still in the bike connected to the harness. View Full Product Details...	US$42.00 ex Sales Tax VAT
Kawasaki Harness Type 6 (KH2/5/6)	The Kawasaki Harness Type 6 allows you to connect a Woolich Racing Mitsubishi USB Interface to the bike harness allowing the ECU to be flashed while still in the bike connected to the harness. View Full Product Details...	US$42.00 ex Sales Tax VAT
Barrel to 2 Pin Plug Bench Harness Power Supply Connector	This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector. View Full Product Details...	US$10.00 ex Sales Tax VAT
Kawasaki Bench Harness Type 6 (KBH6)	The bench flashing harness allows you to flash 2004-2005 ZX10R ECU on the bench. The bench flashing harness needs to be used with the Woolich Racing Mitsubishi USB Interface and a 12v Power supply. Note: this product requires the purchase of Bin Files for use with the Woolich Racing Tuned software View Full Product Details...	US$126.00 ex Sales Tax VAT
Kawasaki Harness Type 2 (KH2/5/6)	The Kawasaki Harness Type 2 allows you to connect a Woolich Racing Mitsubishi USB Interface to the bike harness allowing the ECU to be flashed while still in the bike connected to the harness. View Full Product Details...	US$42.00 ex Sales Tax VAT
Kawasaki Harness Type 3a (KH3A/3B/8B + KEH3A)	Bike Harness for 2011-2015 Kawasaki ZX10R. Allows connection between Woolich Racing Mitsubishi USB Interface and bike harness. Once this harness is installed it allows you to flash the ECU without pulling out the ECU. Includes: Kawasaki Harness Type 3 (Main) Kawasaki Extension Harness Type 3a View Full Product Details...	US$47.00 ex Sales Tax VAT
Kawasaki Bench Harness Type 5 (KBH5)	The bench flashing harness allows you to flash 2006-2007 ZX10R and 2006-2011 ZX14 / ZZR1400 ECUs when they are both installed or not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing Mitsubishi USB Interface. Note: this product requires the purchase of bin file definitions for use with the Woolich Racing Tuned software View Full Product Details...	US$126.00 ex Sales Tax VAT
Kawasaki Extension Harness Type 2 (KEH2/5)	The Kawasaki Extension Harness Type 2 is required on some 2010 ZX10R bikes that do not have the 2nd KDS plug on the main bike harness. If you are purchasing a Kawasaki Harness Type 2 for a 2010 ZX10R please check to ensure that both KDS style plugs are available on the harness. If you are unable to find the 2nd KDS plug you will need to purchase this item. View Full Product Details...	US$16.00 ex Sales Tax VAT
Kawasaki Extension Harness Type 3a (KEH3A)	The Kawasaki Extension Harness Type 3a is the 2 wire harness part of the Kawasaki Harness Type 3a that is left on the bike. You can purchase additional 3a Extension Harnesses to tune additional bikes. Includes: Kawasaki Extension Harness Type 3a View Full Product Details...	US$26.00 ex Sales Tax VAT
Kawasaki Harness Type 13a (KH13A/13B/13C + KEH13A)	On Bike Harness for 2016-2020 Kawasaki ZX10R. Allows connection between Woolich Racing v3 Interface and bike harness. Once this harness is installed it allows you to flash the ECU without pulling out the ECU. Includes: Kawasaki Harness Type 13 (Main) Kawasaki Extension Harness Type 13a View Full Product Details...	US$47.00 ex Sales Tax VAT
Kawasaki Bench Harness Type 3 (KBH3)	This bench flashing harness allows you to flash ECUs when they are not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing Mitsubishi USB Interface. Note: this product requires the purchase of Bin Files and a Woolich Racing Interface for use with the Woolich Racing Tuned software View Full Product Details...	US$105.00 ex Sales Tax VAT
Kawasaki Extension Harness Type 13a (KEH13A)	The Kawasaki Extension Harness Type 13a is the 1 wire harness part of the Kawasaki Harness Type 13a that is left on the bike. You can purchase additional 13a Extension Harnesses to tune additional bikes. Includes: Kawasaki Extension Harness Type 13a View Full Product Details...	US$21.00 ex Sales Tax VAT
Kawasaki Bench Harness Type 13 (KBH13)	This bench flashing harness allows you to flash 2016-2020 ZX10R and 2015-2021 H2 / H2R ECUs when they are not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing Mitsubishi USB Interface. Note: this product requires the purchase of Bin Files for use with the Woolich Racing Tuned software View Full Product Details...	US$105.00 ex Sales Tax VAT
Kawasaki Bench Harness Type 2 (KBH2)	The bench flashing harness allows you to flash 2008-2010 ZX10R and ZRX1200 ECU when they are not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing Mitsubishi USB Interface. Note: this product requires the purchase of Bin Files for use with the Woolich Racing Tuned software View Full Product Details...	US$101.00 ex Sales Tax VAT
Kawasaki Exhaust Valve Eliminator Type 2 (KEV-E2)	The Woolich Racing Exhaust Valve Eliminator allows you to remove the Exhaust Valve and Exhaust Valve Servo motor from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bikes wiring harness before the ignition is switched back on to prevent fault codes from being stored in the ECU. Supported models: - 2007-2016 Z1000 - 2011-2013 Ninja 1000 - 2004-2022 ZX10R - 2005-2018 ZX6R - 2021 ZX6R - 2005-2006 ZX6RR - 2007-2010 Z750 View Full Product Details...	US$51.00 ex Sales Tax VAT
Kawasaki O2 Eliminator Type 1 (KO2-E1)	The Woolich Racing O2 Eliminator allows you to remove the O2 Sensor/s from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bikes wiring harness before the ignition is switched back on to prevent fault codes from being stored in the ECU. Supported models: - 2016-2020 ZX-10R - 2021 ZX10R - 2015-2016 H2 - 2020-2021 Z H2 - 2018-2021 H2 SX - 2020-2021 Versys 1000 View Full Product Details...	US$41.00 ex Sales Tax VAT
Kawasaki Pair Valve Eliminator Type 1 (KPV-E1)	The Woolich Racing PAIR Valve Eliminator allows you to remove the PAIR Valve and PAIR Valve Solenoid from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bike's wiring harness before the ignition is switched back on to prevent fault codes being stored in the ECU. Supported models: - 2012-2021 Ninja 650 - 2012-2021 ZX14R - 2013-2017 Ninja 300 - 2014-2021 Ninja 1000 - 2018-2021 Ninja 400 - 2009-2021 ZX6R - 2014-2016 Z1000 - 2015-2018 Versys 1000 - 2015-2021 Vulcan S - 2008-2021 ZX10R - 2016-2021 Versys 650 - 2017-2021 ZX10RR - 2017-2021 Versys X 300 - 2017-2021 Z125 Pro - 2017-2021 Z650 - 2018-2021 Mule Pro FX - 2018-2021 Mule Pro FXR - 2018-2021 Mule Pro FXT - 2018-2021 Teryx - 2018-2021 Teryx 4 - 2019-2021 Mule Pro MX - 2019-2021 W800 Café - 2020-2021 KLX230 - 2020-2021 KLX230R - 2020-2021 KLX300R - 2020-2021 Z400 - 2021 Teryx KRX 1000 - 2008-2021 Concours 14 - 2017-2020 Z900 - 2009-2013 ZX14 - 2018-2020 Z900RS - 2015-2021 H2 - 2019-2021 H2 SX SE - 2020-2021 Versys 1000 View Full Product Details...	US$41.00 ex Sales Tax VAT
Woolich Racing Merchandise


There are no products for this model, please check back soon...