Woolich Racing Products

Select the Manufacturer, Model and Year.
Manufacturer	Model	Year

2019-2023 Kawasaki ZX6R (636) USB D v3 Package	This package includes everything you need to start tuning your 2019-2023 Kawasaki ZX6R (636) with our USB D v3 and Bench Harness. USB D v3 USB Cable Kawasaki Bench Harness Type 12 Kawasaki Data Harness Type 3 Universal Harness Type 2 Bin File Definition in the Woolich Racing Tuned software PLEASE NOTE - If the bike has a Red diagnostic plug, you will need the Universal Harness Type 2. If the bike has the 6 pin opaque plug you will need the Data Harness Type 3. Either of these harnesses will allow you to connect for engine data. View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$561.00 ex Sales Tax VAT
2024-2025 Kawasaki ZX6R (636) Log Box D-CAN v3	This package includes the Log Box D-CAN v3, On Bike Harness and Bin File Definition allowing you to tune the 2024-2025 Kawasaki ZX6R (636) Log Box D-CAN v3 USB Cable On board 16GB micro SD card Universal Harness Type 3 Kawasaki Bench Harness Type 22 Bin File Definitions in Woolich Racing Tuned Software Kawasaki Bench Harness Type 22 is used to Write ECU Universal Harness Type 3 is used for Engine Data and Diagnostics Note: This package does not include the Zeitronix ZT-3 Wideband O2 kit and associated installation hardware. If you would like the complete package with Wideband O2 please see our other product listing below. View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$630.00 ex Sales Tax VAT
2024-2025 Kawasaki ZX6R (636) Log Box D-CAN v3 + Zeitronix ZT-3 Wideband O2 Package	This package includes everything you need to start tuning your 2024-2025 Kawasaki ZX6R (636) with our Log Box (Denso) v3 and Zeitronix ZT-3 Wideband O2 Sensor Log Box D-CAN v3 USB Cable On board 16GB micro SD card Universal Harness Type 3 Kawasaki Bench Harness Type 22 Bin File Definition in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit O2 Sensor Bung Kawasaki Bench Harness Type 22 is used to Write ECU Universal Harness Type 3 is used for Engine Data and Diagnostics View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$872.00 ex Sales Tax VAT
2019-2023 Kawasaki ZX6R (636) Log Box (Denso) v3 + Zeitronix ZT-3 Wideband O2 Package	This package includes everything you need to start tuning your 2019-2023 Kawasaki ZX6R with our Log Box (Denso) v3 and Zeitronix ZT-3 Wideband O2 Sensor. Log Box (Denso) v3 USB Cable On board 4GB micro SD card Kawasaki Bench Harness Type 12 Kawasaki Data Harness Type 3 Universal Harness Type 2 Bin File Definitions in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit O2 sensor bung View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$898.00 ex Sales Tax VAT
2013-2018 Kawasaki ZX6R (636) USB (Denso) v3 Package	This package includes everything you need to start tuning your 2013-2018 Kawasaki ZX6R (636) with our USB (Denso) v3 and On Bike Harness. USB (Denso) v3 USB Cable Kawasaki Harness Type 7 Bin File Definition in the Woolich Racing Tuned software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$414.00 ex Sales Tax VAT
2013-2018 Kawasaki ZX6R (636) Log Box (Denso) v3 + Zeitronix ZT-3 Wideband O2 Package	This package includes everything you need to start tuning your 2013-2018 Kawasaki ZX6R (636) with our Log Box (Denso) v3 and Zeitronix ZT-3 Wideband O2 Sensor. Log Box (Denso) v3 USB Cable On board 2GB micro SD card Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) RJ12 cable to connect Zeitronix to Log Box Zeitronix Installation Kit (12v relay, wires, wideband O2 bung and connectors etc) Kawasaki Harness Type 7 Bin File Definitions in Woolich Racing Tuned Software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$751.00 ex Sales Tax VAT
2019-2023 Kawasaki ZX6R (636) Race Tools Package	The Race Tools package allows you to enable Quickshifter, Launch Control and Pit Speed Limiter in the Stock ECU. The package includes: High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Kawasaki Race Tools Harness Type 5 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. The quickshifter kills both fuel and ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM Pit Speed Limiter allows you to set the RPM to limit the speed while riding through the pits.* * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness connects to the stock quickshifter plug on the bikes harness. * Pit Speed Limiter harness sold separately Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$509.00 ex Sales Tax VAT
2019-2023 Kawasaki ZX6R (636) Race Tools Key Only	This item is for the Race Tools Key Only, it allows you to enable Woolich Racing Race Tools using the stock Shift Sensor. No Hardware is included with this item. The Race Tools package allows you to add Quickshifter, Pit Speed Limiter and Launch Control to the Stock ECU. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Pit Speed Limiter RPM can be configured. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. The Pit Speed Limiter is not available when using the Key Only option with the stock Kawasaki Quickshifter, the Pit Speed Limiter requires the purchase of the full Race Tools package for this model. *** This stock Kawasaki Qucikshifter Sensor will not work in Race Shift Pattern, you should purchase the full Race Tools kit with Woolich Racing Cordona Sensor for this application. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$273.00 ex Sales Tax VAT
2019-2023 ZX6R (636) Launch Control Key	Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and also Ramp Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU. If you already have a Quickshifter or Air Shifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$210.00 ex Sales Tax VAT
Pit Speed Limiter Harness	The Pit Speed Limiter harness is used with our Race Tools Package, it consists of a harness and water proof push button switch which allows you to limit the RPM of the bike in 1st gear while riding in the pits. You must have a Race Tool Package to use the Pit Speed Limiter Harness. The Pit Speed Limiter harness also includes a stainless steel bracket used to mount the button on the bike's switch gear. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$26.00 ex Sales Tax VAT
2013-2018 Kawasaki ZX6R (636) Race Tools Package	The Race Tools package allows you to enable Quickshifter, Launch Control and Pit Speed Limiter in the Stock ECU. The package includes: High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Kawasaki Race Tools Harness Type 4 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. The quickshifter kills both fuel and ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM Pit Speed Limiter allows you to set the RPM to limit the speed while riding through the pits.* * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the stock Exhaust Valve plugs on the bike's harness, the stock Exhaust Valve should be removed from the bike and disabled in our software * Pit Speed Limiter harness sold separately Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$467.00 ex Sales Tax VAT
2013-2018 ZX6R (636) Launch Control Key	Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and also Ramp Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU. If you already have a Quickshifter or Air Shifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$210.00 ex Sales Tax VAT
2019-2023 Kawasaki ZX6R (636) Bin File Definition	Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2019-2023 Kawasaki ZX6R (636) View Full Product Details...	ex Sales Tax VAT
Kawasaki Bench Harness Type 22 (KBH22)	The bench flashing harness allows you to flash the 2020-2023 Kawasaki Z900 / Z650 ECUs . The bench flashing harness comes with a 12v plug to be used in with a 12v power supply, and needs to be used in conjunction with the Woolich Racing Denso USB Interface. Note: this product requires the purchase of bin file definitions for use with the Woolich Racing Tuned software Note: If you are working with the EU Restricted ECU (48 pin ECU Plug), you will need the Kawasaki Bench Harness Type 23. View Full Product Details...	US$126.00 ex Sales Tax VAT
Universal Harness Type 2 (UH-2)	This Universal harness allows you to connect to the 6 pin Red Diagnostic Plug on the bike and read and clear fault codes and view Engine data using a USB D v3, Log Box D v3, USB M v3, Log Box M v3, USB M-Ducv3 and Log Box M-Ducv3 Note: USB v3 and Log Box v3 is not included. PLEASE NOTE - Universal Harness Type 2 (known previously as Kawasaki Data Harness Type 4) View Full Product Details...	US$42.00 ex Sales Tax VAT
Universal Harness Type 3 (UH-3)	The Universal Harness Type 3 connects your Woolich Racing Log Box D-CAN to bikes with the newer red 6 pin OBD2 bike plug. View Full Product Details...	US$42.00 ex Sales Tax VAT
Kawasaki Data Harness Type 3 (KDH3)	Data harness used with v3 Denso Interfaces to provide Engine Data and Diagnostics for 2017+ Kawasaki Denso ECU equipped bikes. View Full Product Details...	US$26.00 ex Sales Tax VAT
Kawasaki Bench Harness Type 12 (KBH12)	The bench flashing harness allows you to flash ECU's when they are not installed in the bike. The bench flashing harness comes with a 12v power supply plug. Note: If you have a Z900 ECU with part number 21175-1307 or 21175-1362 you will need the Kawasaki Bench Harness Type 19 View Full Product Details...	US$126.00 ex Sales Tax VAT
Kawasaki Harness Type 7 (KH1B/1C/7/12 + KEH 7/12))	On Bike Harness to connect USB Interface and/or Log Box to 2013-2017 Kawasaki ZX6R (636) enabling both ECU Flashing and Engine Data Includes: Kawasaki Main Harness Type 7 Kawasaki Extension Harness Type 7 Note: this product required the purchase of the Bin File Definitions for the ZX6R for use with the Woolich Racing Tuned software View Full Product Details...	US$47.00 ex Sales Tax VAT
Kawasaki Extension Harness Type 7 (KEH7/12)	The extension harness is installed permanently on the bike. You can purchase extension harnesses to tune additional bikes using the Kawasaki Main Harness Type 7. Includes: Kawasaki Extension Harness Type 7 View Full Product Details...	US$26.00 ex Sales Tax VAT
Kawasaki Bench Harness Type 7 (KBH7)	The bench flashing harness allows you to flash 2013-2018 ZX6R ECUs when they are on the bench not installed in the bike. Note: this product required the purchase of the Bin File Definitions for the ZX6R for use with the Woolich Racing Tuned software View Full Product Details...	US$126.00 ex Sales Tax VAT
Woolich Racing Merchandise


There are no products for this model, please check back soon...