2003-2004 Kawasaki ZX6R
USB D v3 Package
|
This package includes everything you need to start tuning your 2003-2004 Kawasaki ZX6R with our USB D v3 and On Bike Harness. - USB D v3
- Kawasaki Harness Type 14a
- USB Cable
- Bin File Definition in the Woolich Racing Tuned software.
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$408.00
ex Sales Tax VAT
|
|
2005-2006 Kawasaki ZX6R
USB D v3 Package
|
This package includes everything you need to start tuning your 2005-2006 Kawasaki ZX6R with our USB D v3 and On Bike Harness. - USB D v3
- Kawasaki Harness Type 4
- USB Cable
- Bin File Definition in the Woolich Racing Tuned software.
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$414.00
ex Sales Tax VAT
|
|
2007-2008 Kawasaki ZX6R
USB D v3 Package
|
This package includes everything you need to start tuning your 2007-2008 Kawasaki ZX6R with our USB D v3 and On Bike Harness. - USB D v3
- Kawasaki Harness Type 4
- USB Cable
- Bin File Definition in the Woolich Racing Tuned software.
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$414.00
ex Sales Tax VAT
|
|
2009 Kawasaki ZX6R
USB D v3Package
|
This package includes everything you need to start tuning your 2009 Kawasaki ZX6R with our USB D v3 and On Bike Harness.- USB D v3
- USB Cable
- Kawasaki Harness Type 1a
- Bin File Definition in the Woolich Racing Tuned software
Please check the diagnostic plug on the bike before ordering. This package suits the earlier black 4 pin diagnostic plug.
If you have the Opaque style Diagnostic Plug please contact us before ordering.
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$414.00
ex Sales Tax VAT
|
|
2010-2022 Kawasaki ZX6R (600)
USB D v3 Package
|
This package includes everything you need to start tuning your 2010-2022 Kawasaki ZX6R (600) with our USB Dv3 and On Bike Harness.- USB D v3
- USB Cable
- Kawasaki Harness Type 1b
- Bin File Definition in the Woolich Racing Tuned software
Please check the diagnostic plug on the bike before ordering. This package suits the later opaque 4 pin diagnostic plug.
If you have the Black style Diagnostic Plug please contact us before ordering.
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$414.00
ex Sales Tax VAT
|
|
2005-2006 Kawasaki ZX6R
Log Box D v3
+ Zeitronix ZT-3 Wideband O2 Package
|
This package includes everything you need to start tuning your 2005-2006 Kawasaki ZX6R with our Log Box D v3 and Zeitronix ZT-3 Wideband O2 Sensor. - Log Box D v3
- USB Cable
- On board 4GB micro SD card
- Zeitronix ZT-3 Wideband O2 Controller
- Zeitronix Wideband O2 Sensor (3 foot cable)
- RJ12 cable to connect Zeitronix to Log Box
- Zeitronix Installation Kit (12v relay, wires, wideband O2 bung and connectors etc)
- Kawasaki Harness Type 4
- Bin File Definitions in Woolich Racing Tuned Software
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$751.00
ex Sales Tax VAT
|
|
2005-2006 Kawasaki ZX6R
Log Box D v3
+ Zeitronix ZT-3 Wideband O2 Package
|
This package includes everything you need to start tuning your 2003-2004 Kawasaki ZX6R with our Log Box D v3 and Zeitronix ZT-3 Wideband O2 Sensor. - Log Box D v3
- USB Cable
- On board 4GB micro SD card
- Zeitronix ZT-3 Wideband O2 Controller
- Zeitronix Wideband O2 Sensor (3 foot cable)
- RJ12 cable to connect Zeitronix to Log Box
- Zeitronix Installation Kit (12v relay, wires, wideband O2 bung and connectors etc)
- Kawasaki Harness Type 14a
- Bin File Definitions in Woolich Racing Tuned Software
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$746.00
ex Sales Tax VAT
|
|
2007-2008 Kawasaki ZX6R
Log Box D v3
+ Zeitronix ZT-3 Wideband O2 Package
|
This package includes everything you need to start tuning your 2007-2008 Kawasaki ZX6R with our Log Box D v3 and Zeitronix ZT-3 Wideband O2 Sensor. - Log Box D v3
- USB Cable
- On board 4GB micro SD card
- Zeitronix ZT-3 Wideband O2 Controller
- Zeitronix Wideband O2 Sensor (3 foot cable)
- RJ12 cable to connect Zeitronix to Log Box
- Zeitronix Installation Kit (12v relay, wires, wideband O2 bung and connectors etc)
- Kawasaki Harness Type 4
- Bin File Definitions in Woolich Racing Tuned Software
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$751.00
ex Sales Tax VAT
|
|
2009 Kawasaki ZX6R
Log Box (Denso) v3
+ Zeitronix ZT-3 Wideband O2 Package
|
This package includes everything you need to start tuning your 2009-2012 Kawasaki ZX6R with our Log Box (Denso) v3 and Zeitronix ZT-3 Wideband O2 Sensor. - Log Box (Denso) v3
- USB Cable
- On board 4GB micro SD card
- Zeitronix ZT-3 Wideband O2 Controller
- Zeitronix Wideband O2 Sensor (3 foot cable)
- RJ12 cable to connect Zeitronix to Log Box
- Zeitronix Installation Kit (12v relay, wires, wideband O2 bung and connectors etc)
- Kawasaki Harness Type 1a
- Bin File Definitions in Woolich Racing Tuned Software
Please check the diagnostic plug on the bike before ordering. This package suits the earlier black 4 pin diagnostic plug.
If you have the Opaque style Diagnostic Plug please contact us before ordering.
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$751.00
ex Sales Tax VAT
|
|
2010-2022 Kawasaki ZX6R (600)
Log Box (Denso) v3
+ Zeitronix ZT-3 Wideband O2 Package
|
This package includes everything you need to start tuning your 2010-2022 Kawasaki ZX6R (600) with our Log Box (Denso) v3 and Zeitronix ZT-3 Wideband O2 Sensor. - Log Box (Denso) v3
- USB Cable
- On board 2GB micro SD card
- Zeitronix ZT-3 Wideband O2 Controller
- Zeitronix Wideband O2 Sensor (3 foot cable)
- RJ12 cable to connect Zeitronix to Log Box
- Zeitronix Installation Kit (12v relay, wires, wideband O2 bung and connectors etc)
- Kawasaki Harness Type 1b
- Bin File Definitions in Woolich Racing Tuned Software
Please check the diagnostic plug on the bike before ordering. This package suits the later opaque 4 pin diagnostic plug.
If you have the Black style Diagnostic Plug please contact us before ordering.
View Full Product Details...
This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.
|
US$751.00
ex Sales Tax VAT
|
|
2009 Kawasaki ZX6R (600) Race Tools Package
|
The Race Tools package allows you to enable Quickshifter, Launch Control and Pit Speed Limiter in the Stock ECU. The package includes: - High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern.
- Shift rod for standard shift configuration*
- Kawasaki Race Tools Harness Type 2 which allows the quickshifter to be plugged into the bikes wiring harness**
- Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software.
Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. The quickshifter kills both fuel and ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM Pit Speed Limiter allows you to set the RPM to limit the speed while riding through the pits.*** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. ** This harness uses the stock Exhaust Valve plugs on the bike's harness, the stock Exhaust Valve should be removed from the bike and disabled in our software *** Pit Speed Limiter harness sold separately
Please check the diagnostic plug on the bike before ordering. This package suits the earlier black 4 pin diagnostic plug.
If you have the Opaque style Diagnostic Plug please contact us before ordering.
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
View Full Product Details...
|
US$467.00
ex Sales Tax VAT
|
|
2010-2022 Kawasaki ZX6R (600) Race Tools Package
|
The Race Tools package allows you to enable Quickshifter, Launch Control and Pit Speed Limiter in the Stock ECU. The package includes: - High quality strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern.
- Shift rod for standard shift configuration*
- Kawasaki Race Tools Harness Type 4 which allows the quickshifter to be plugged into the bikes wiring harness**
- Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software.
Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. The quickshifter kills both fuel and ignition. Launch Control allows you to configure Delay, Launch RPM, Ramp Time and Ramp RPM Pit Speed Limiter allows you to set the RPM to limit the speed while riding through the pits.*** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. ** This harness uses the stock Exhaust Valve plugs on the bike's harness, the stock Exhaust Valve should be removed from the bike and disabled in our software *** Pit Speed Limiter harness sold separately
Please check the diagnostic plug on the bike before ordering. This package suits the opaque 4 pin diagnostic plug.
If you have the black earlier style Diagnostic Plug please contact us before ordering.
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
View Full Product Details...
|
US$467.00
ex Sales Tax VAT
|
|
Pit Speed Limiter Harness
|
The Pit Speed Limiter harness is used with our Race Tools Package, it consists of a harness and water proof push button switch which allows you to limit the RPM of the bike in 1st gear while riding in the pits. You must have a Race Tool Package to use the Pit Speed Limiter Harness.
The Pit Speed Limiter harness also includes a stainless steel bracket used to mount the button on the bike's switch gear.
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
View Full Product Details...
|
US$26.00
ex Sales Tax VAT
|
|
2009-2022 ZX6R (600) Launch Control Key
|
Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and also Ramp Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU.
If you already have a Quickshifter or Air Shifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU.
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).
View Full Product Details...
|
US$210.00
ex Sales Tax VAT
|
|
Kawasaki 2003-2004 ZX6R Bin File Definition
|
Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2003-2004 Kawasaki ZX6R
View Full Product Details...
|
ex Sales Tax VAT
|
|
Kawasaki Harness Type 14a (KH14A
+ KEH14A/14B)
|
On Bike Harness to connect USB Interface to applicable Kawasaki bikes enabling both ECU Flashing and Engine Data. Includes: - Kawasaki Type 14a Main Harness
- Kawasaki Extension Harness Type 14a
View Full Product Details...
|
US$42.00
ex Sales Tax VAT
|
|
Kawasaki Harness Type 1a (KH1/4)
|
On Bike Harness to connect USB Interface and/or Log Box to 2009 Kawasaki ZX6R enabling both ECU Flashing and Engine Data Includes: - Kawasaki Main Harness Type 1a
- Kawasaki Extension Harness Type 1a
View Full Product Details...
|
US$47.00
ex Sales Tax VAT
|
|
Kawasaki Harness Type 4 (KH1/4
+ KEH1/1B/4)
|
On Bike Harness to connect USB Interface to 2005-2008 Kawasaki ZX6R and 2005-2006 ZX6R enabling both ECU Flashing and Engine Data. Includes: - Kawasaki Type 4 Main Harness
- Kawasaki Extension Harness Type 4
View Full Product Details...
|
US$47.00
ex Sales Tax VAT
|
|
Barrel to 2 Pin Plug Bench Harness Power Supply Connector
|
This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector.
View Full Product Details...
|
US$10.00
ex Sales Tax VAT
|
|
Kawasaki Extension Harness Type 4 (KEH1/1B/4)
|
Extension Harness for 2005-2008 ZX6R. This is the part of the Kawasaki Type 4 Harness that remains on the bike. Includes: - Kawasaki Extension Harness Type 4
View Full Product Details...
|
US$26.00
ex Sales Tax VAT
|
|
Kawasaki Bench Harness Type 4 (KBH4)
|
The bench flashing harness allows you to flash 2005-2008 ZX6R ECUs when they are both installed or not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing USB Interface.
View Full Product Details...
|
US$101.00
ex Sales Tax VAT
|
|
Kawasaki Extension Harness Type 14A/14B (KEH14A/14B)
|
Extension Harness for Kawasaki Harness Type 14. This is the part of the Kawasaki Type 14 Harness that remains on the bike. Includes: - Kawasaki Extension Harness Type 14
View Full Product Details...
|
US$21.00
ex Sales Tax VAT
|
|
Kawasaki Harness Type 1b (KH1B/1C/7/12
+ KEH1/1B/4)
|
On Bike Harness to connect USB Interface and/or Log Box to 2013-2018 Kawasaki ZX6R (600) enabling both ECU Flashing and Engine Data Includes: - Kawasaki Main Harness Type 1b
- Kawasaki Extension Harness Type 1
Please check the diagnostic plug on the bike before ordering. This harness suits the later opaque 4 pin diagnostic plug.
View Full Product Details...
|
US$47.00
ex Sales Tax VAT
|
|
Kawasaki Extension Harness Type 1 (KEH1/1B/4)
|
On Bike Harness to connect USB Interface and/or Log Box to 2009-2021 Kawasaki ZX6R enabling both ECU Flashing and Engine Data. This is the short extension harness that stays permanently on installed on the bike.
View Full Product Details...
|
US$26.00
ex Sales Tax VAT
|
|
Kawasaki Bench Harness Type 1 (KBH1)
|
The bench flashing harness allows you to flash ECUs when they are not installed in the bike. The bench flashing harness comes with a 12v power supply plug.
View Full Product Details...
|
US$101.00
ex Sales Tax VAT
|
|
Kawasaki Exhaust Valve Eliminator Type 2 (KEV-E2)
|
The Woolich Racing Exhaust Valve Eliminator allows you to remove the Exhaust Valve and Exhaust Valve Servo motor from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system.
The eliminator should be plugged into the bikes wiring harness before the ignition is switched back on to prevent fault codes from being stored in the ECU.
Supported models:
- 2007-2016 Z1000
- 2011-2013 Ninja 1000 - 2004-2022 ZX10R
- 2005-2018 ZX6R - 2021 ZX6R - 2005-2006 ZX6RR - 2007-2010 Z750
View Full Product Details...
|
US$51.00
ex Sales Tax VAT
|
|
Kawasaki Pair Valve Eliminator Type 1 (KPV-E1)
|
The Woolich Racing PAIR Valve Eliminator allows you to remove the PAIR Valve and PAIR Valve Solenoid from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system.
The eliminator should be plugged into the bike's wiring harness before the ignition is switched back on to prevent fault codes being stored in the ECU.
Supported models:
- 2012-2021 Ninja 650
- 2012-2021 ZX14R
- 2013-2017 Ninja 300
- 2014-2021 Ninja 1000
- 2018-2021 Ninja 400
- 2009-2021 ZX6R
- 2014-2016 Z1000
- 2015-2018 Versys 1000
- 2015-2021 Vulcan S
- 2008-2021 ZX10R
- 2016-2021 Versys 650
- 2017-2021 ZX10RR
- 2017-2021 Versys X 300
- 2017-2021 Z125 Pro
- 2017-2021 Z650
- 2018-2021 Mule Pro FX
- 2018-2021 Mule Pro FXR
- 2018-2021 Mule Pro FXT
- 2018-2021 Teryx
- 2018-2021 Teryx 4
- 2019-2021 Mule Pro MX
- 2019-2021 W800 Café
- 2020-2021 KLX230
- 2020-2021 KLX230R
- 2020-2021 KLX300R
- 2020-2021 Z400
- 2021 Teryx KRX 1000
- 2008-2021 Concours 14
- 2017-2020 Z900
- 2009-2013 ZX14
- 2018-2020 Z900RS
- 2015-2021 H2
- 2019-2021 H2 SX SE - 2020-2021 Versys 1000
View Full Product Details...
|
US$41.00
ex Sales Tax VAT
|
|
| Woolich Racing Merchandise |
|
|
|
|
|
| |
|
|
There are no products for this model, please check back soon...
|
|