Woolich Racing Products

Select the Manufacturer, Model and Year.
Manufacturer	Model	Year

2014-2024 Yamaha XT1200Z Super Ténéré Package	This package includes everything you need to start tuning your 2014-2024 Yamaha XT1200Z Super Ténéré with our Log Box D-CAN v3. Log Box D-CAN v3 USB Cable On board 2GB micro SD card Yamaha Harness Type 6 Bin File Definitions in Woolich Racing Tuned Software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$509.00 ex Sales Tax VAT
2014-2024 Yamaha XT1200Z Super Ténéré Log Box D-CAN + Zeitronix ZT-3 Wideband Package	This package includes everything you need to start tuning your 2014-2024 Yamaha XT1200Z Super Ténéré with our Log Box D-CAN v3 and Zeitronix ZT-3 Wideband O2 Sensor. Log Box D-CAN v3 USB Cable On board 2GB micro SD card Yamaha Harness Type 6 Bin File Definitions in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) Yamaha Wideband O2 Installation Kit: RJ12 cable to connect Zeitronix to Log Box Yamaha Power Harness O2 sensor bung View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$751.00 ex Sales Tax VAT
2014-2023 Yamaha XT1200Z Race Tools	The Race Tools package allows you to enable Autoblipper, Quickshifter, Engine Warm Up, Pit Speed Limiter and Launch Control in the Stock ECU. The package includes: High quality dual direction strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Yamaha Race Tools Type 2 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Duration maps are fully configurable per gear. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. Pit Speed Limiter RPM can be configured.* Engine Warm Up parameters are configurable.*** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the stock O2 Sensor plugs on the bike's harness, the stock O2 sensor should be removed from the bike and disabled in the WRT software. * The Pit Speed Limiter / Engine Warm Up requires the purchase of an additional Pit Speed Limiter harness. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$509.00 ex Sales Tax VAT
Pit Speed Limiter Harness	The Pit Speed Limiter harness is used with our Race Tools Package, it consists of a harness and water proof push button switch which allows you to limit the RPM of the bike in 1st gear while riding in the pits. You must have a Race Tool Package to use the Pit Speed Limiter Harness. The Pit Speed Limiter harness also includes a stainless steel bracket used to mount the button on the bike's switch gear. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$26.00 ex Sales Tax VAT
2014-2024 Yamaha XT1200Z Super Ténéré Stock Bin File Definitions	Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2014-2024 Yamaha XT1200Z Super Ténéré View Full Product Details...	ex Sales Tax VAT
Yamaha Wideband O2 Installation Kit (Zeitronix)	Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Yamaha models Includes: RJ12 cable for connecting ZT-3 to Woolich Racing Products Yamaha Power Harness O2 Stainless Steel Bung Adhesive Velcro for attaching ZT-3 to bike. View Full Product Details...	US$37.00 ex Sales Tax VAT
Barrel to 2 Pin Plug Bench Harness Power Supply Connector	This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector. View Full Product Details...	US$10.00 ex Sales Tax VAT
Yamaha Harness Type 6 (YH6/7/8 + YEH6)	On Bike Harness that allows connection between Woolich Racing Log Box D-CAN v3 Interface and bike harness. Once this harness is installed it allows you to flash the ECU without pulling out the ECU. Includes: Yamaha Harness Type 6 (Main) Yamaha Harness Type 6 (Extension) View Full Product Details...	US$47.00 ex Sales Tax VAT
Yamaha Extension Harness Type 6 (YEH6)	The Yamaha Extension Harness Type 6 is the 4 wire extension harness that is permanently installed on the bike and connects the Yamaha Harness Type 6 main harness to the ECU. You can purchase additional Extension Harnesses to tune additional bikes. View Full Product Details...	US$26.00 ex Sales Tax VAT
Yamaha Bench Harness Type 6 (YBH6)	This bench flashing harness allows you to flash ECUs when they are out of the bike on the bench. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing Log Box D-CAN v3 Interface. Note: this product requires the purchase of Bin Files for use with the Woolich Racing Tuned software and the Log Box D-CAN v3 interface. This product also requires a 12v 1 Amp power supply suitable for your region. If using this product on a 2016+ bike you will need a OBD2 Harness and Code Reader to clear fault codes after writing. Woolich Racing have these available for purchase. View Full Product Details...	US$105.00 ex Sales Tax VAT
Woolich Racing Merchandise


There are no products for this model, please check back soon...