Woolich Racing Products

Select the Manufacturer, Model and Year.
Manufacturer	Model	Year

2004-2006 Yamaha YZF-R1 USB (Mitsubishi) v3 Package	This package includes everything you need to start tuning your 2004-2006 Yamaha YZF-R1 with our USB (Mitsubishi) v3 Interface. USB (Mitsubishi) v3 Yamaha Bench Harness Type 3 USB Cable Bin File Definitions in the Woolich Racing Tuned software View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$492.00 ex Sales Tax VAT
2007-2008 Yamaha YZF-R1 USB (Denso) v3 Package	This package includes everything you need to start tuning your 2007-2008 Yamaha YZF-R1 with our USB (Denso) v3 Interface. USB (Denso) v3 Yamaha Harness Type 4 USB Cable Bin File Definitions in the Woolich Racing Tuned software View Full Product Details...	US$414.00 ex Sales Tax VAT
2009-2011 Yamaha YZF-R1 USB (Denso) v3 Package	This package includes everything you need to start tuning your 2009-2011 Yamaha YZF-R1 with our USB (Denso) v3 Interface and Harness. USB (Denso) v3 Yamaha Harness Type 5 USB Cable Bin File Definitions in the Woolich Racing Tuned software View Full Product Details...	US$414.00 ex Sales Tax VAT
2012-2014 Yamaha YZF-R1 USB (Denso) v3 Package	This package includes everything you need to start tuning your 2012-2014 Yamaha YZF-R1 with our USB (Denso) v3 Interface and Harness. USB (Denso) v3 Yamaha Harness Type 5 USB Cable Bin File Definitions in the Woolich Racing Tuned software View Full Product Details...	US$414.00 ex Sales Tax VAT
2015-2016 YZF-R1 / YZF-R1M Log Box D-CAN Package	This package includes the Log Box D-CAN v3, On Bike Harness and Bin File Definition allowing you to tune the 2015-2016 Yamaha YZF-R1 / YZF-R1M Log Box D-CAN v3 USB Cable On board 2GB micro SD card Yamaha Harness Type 7a Bin File Definitions in Woolich Racing Tuned Software Note: This package does not include the Zeitronix ZT-3 Wideband O2 kit and associated installation hardware. If you would like the complete package with Wideband O2 please see our other product listing below. View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$509.00 ex Sales Tax VAT
2017-2019 YZF-R1 / YZF-R1M Log Box D-CAN Package	This package includes the Log Box D-CAN v3, On Bike Harness and Bin File Definition allowing you to tune the 2017-2019 Yamaha YZF-R1 / YZF-R1M Log Box D-CAN v3 USB Cable On board 2GB micro SD card Yamaha Harness Type 7a Bin File Definitions in Woolich Racing Tuned Software Note: This package does not include the Zeitronix ZT-3 Wideband O2 kit and associated installation hardware. If you would like the complete package with Wideband O2 please see our other product listing below. View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$509.00 ex Sales Tax VAT
2020-2024 YZF-R1 / YZF-R1M Log Box D-CAN Package	This package includes the Log Box D-CAN v3, On Bike Harness and Bin File Definition allowing you to tune the 2020-2024 Yamaha YZF-R1 / YZF-R1M Log Box D-CAN v3 USB Cable On board 16GB micro SD card Universal Harness Type 3 Bin File Definitions in Woolich Racing Tuned Software Note: This package does not include the Zeitronix ZT-3 Wideband O2 kit and associated installation hardware. If you would like the complete package with Wideband O2 please see our other product listing below. View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$504.00 ex Sales Tax VAT
2015-2016 YZF-R1 / YZF-R1M Log Box D-CAN + Zeitronix ZT-3 Wideband Package	This package includes everything you need to start tuning your 2015-2016 Yamaha YZF-R1 / YZF-R1M with our Log Box D-CAN v3 and Zeitronix ZT-3 Wideband O2 Sensor. Log Box D-CAN v3 USB Cable On board 2GB micro SD card Yamaha Harness Type 7a Bin File Definitions in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) Yamaha Wideband O2 Installation Kit: RJ12 cable to connect Zeitronix to Log Box Yamaha Power Harness O2 sensor bung View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$751.00 ex Sales Tax VAT
2017-2019 YZF-R1 / YZF-R1M Log Box D-CAN + Zeitronix ZT-3 Wideband Package	This package includes everything you need to start tuning your 2017-2019 Yamaha YZF-R1 / YZF-R1M with our Log Box D-CAN v3 and Zeitronix ZT-3 Wideband O2 Sensor. Log Box D-CAN v3 USB Cable On board 2GB micro SD card Yamaha Harness Type 7a Bin File Definitions in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) Yamaha Wideband O2 Installation Kit: RJ12 cable to connect Zeitronix to Log Box Yamaha Power Harness O2 sensor bung View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$751.00 ex Sales Tax VAT
2020-2024 YZF-R1 / YZF-R1M Log Box D-CAN + Zeitronix ZT-3 Wideband Package	This package includes the Log Box D-CAN v3, On Bike Harness and Bin File Definition allowing you to tune the 2020-2024 Yamaha YZF-R1 / YZF-R1M Log Box D-CAN v3 USB Cable On board 16GB micro SD card Universal Harness Type 3 Bin File Definitions in Woolich Racing Tuned Software Zeitronix ZT-3 Wideband O2 Controller Zeitronix Wideband O2 Sensor (3 foot cable) Yamaha Wideband O2 Installation Kit: RJ12 cable to connect Zeitronix to Log Box Yamaha Power Harness O2 sensor bung View Full Product Details... This product comes with 1 Bin File Definition Key allowing you to tune 1 ECU's as many times as you like. Additional Bin File Definition Keys are required for each additional ECU's and can be purchased from within the WRT software.	US$746.00 ex Sales Tax VAT
2007-2008 Yamaha YZF-R1 Race Tools	The Race Tools package allows you to add Autoblipper, Quickshifter, Pit Speed Limiter, Engine Warm Up and Launch Control to the Stock R1 ECU. The package includes: High quality dual direction strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Yamaha Race Tools Type 1 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Duration maps are fully configurable per gear. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. Pit Speed Limiter RPM can be configured.* Engine Warm Up parameters are configurable.*** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the stock exhaust valve plugs on the bike's harness, the stock exhaust valve should be removed from the bike and disabled in the WRT software * The Pit Speed Limiter / Engine Warm Up requires the purchase of an additional Pit Speed Limiter harness Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$509.00 ex Sales Tax VAT
2017-2019 YZF-R1 Pit Speed Limiter	This product includes the Yamaha Race Tools Harness Type 1, Pit Speed Limiter Harness and Pit Speed Limiter Key allowing you to enable the Pit Speed Limiter in 1 ECU within the Woolich Racing Tuned (WRT) software.. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$136.00 ex Sales Tax VAT
2009-2011 Yamaha YZF-R1 Race Tools	The Race Tools package allows you to add Autoblipper, Quickshifter, Pit Speed Limiter, Engine Warm Up and Launch Control to the Stock R1 ECU. The package includes: High quality dual direction strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Yamaha Race Tools Type 2 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Duration maps are fully configurable per gear. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. Pit Speed Limiter RPM can be configured.* Engine Warm Up parameters are configurable.*** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the O2 sensor plugs on the bike's harness, the stock O2 sensor should be removed from the bike and disabled in the WRT software * The Pit Speed Limiter / Engine Warm Up requires the purchase of an additional Pit Speed Limiter harness Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$509.00 ex Sales Tax VAT
2012-2014 Yamaha YZF-R1 Race Tools	The Race Tools package allows you to add Autoblipper, Quickshifter, Pit Speed Limiter, Engine Warm Up and Launch Control to the Stock R1 ECU. The package includes: High quality dual direction strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Yamaha Race Tools Type 2 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Duration maps are fully configurable per gear. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. Pit Speed Limiter RPM can be configured.* Engine Warm Up parameters are configurable.*** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the O2 sensor plugs on the bike's harness, the stock O2 sensor should be removed from the bike and disabled in the WRT software * The Pit Speed Limiter / Engine Warm Up requires the purchase of an additional Pit Speed Limiter harness Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$509.00 ex Sales Tax VAT
2015-2016 Yamaha YZF-R1 Race Tools	The Race Tools package allows you to add Autoblipper, Quickshifter, Pit Speed Limiter, Engine Warm Up and Launch Control to the Stock R1 and R1M ECU. The package includes: High quality dual direction strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Yamaha Race Tools Type 1 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Duration maps are fully configurable per gear. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. Pit Speed Limiter RPM can be configured.* Engine Warm Up parameters are configurable.*** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the stock exhaust valve plugs on the bike's harness, the stock exhaust valve should be removed from the bike and disabled in the WRT software * The Pit Speed Limiter / Engine Warm Up requires the purchase of an additional Pit Speed Limiter harness Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$509.00 ex Sales Tax VAT
2017-2019 Yamaha YZF-R1 Race Tools	The Race Tools package allows you to add Autoblipper, Quickshifter, Pit Speed Limiter, Engine Warm Up and Launch Control to the Stock R1 and R1M ECU. The package includes: High quality dual direction strain gauge Quickshifter with digitally controlled pressure sensing that can be used in regular or race shift pattern. Shift rod for standard shift configuration* Yamaha Race Tools Type 1 which allows the quickshifter to be plugged into the bikes wiring harness Race Tools Key to allow the use of the Race Tools on one ECU in the Woolich Racing Tuned software. Quickshifter Kill times are configurable per gear with 3D maps allowing Kill Times to be set for the full range of TPS and RPM combinations. Autoblipper Opening and Duration maps are fully configurable per gear. Launch Control allows you to configure Delay, Launch RPM and Hold Speed. Pit Speed Limiter RPM can be configured.* Engine Warm Up parameters are configurable.*** * Contact us after ordering if you have after-market rearsets or are using a race shift pattern and we will swap the shift rod for a generic rod that can be cut and tapped to the correct length. This harness uses the stock exhaust valve plugs on the bike's harness, the stock exhaust valve should be removed from the bike and disabled in the WRT software * The Pit Speed Limiter / Engine Warm Up requires the purchase of an additional Pit Speed Limiter harness Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$509.00 ex Sales Tax VAT
2015-2016 Yamaha YZF-R1 Launch Control Key	Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and other Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU. If you already have a Quickshifter or Air Shifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU. If you have the full Woolich Racing Race Tools package for your bike you do not need to purchase this separate Launch Control Key. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$210.00 ex Sales Tax VAT
2017-2019 Yamaha YZF-R1 Launch Control Key	Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and other Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU. If you already have a Quickshifter or Air Shifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU. If you have the full Woolich Racing Race Tools package for your bike you do not need to purchase this separate Launch Control Key. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$210.00 ex Sales Tax VAT
Pit Speed Limiter Harness	The Pit Speed Limiter harness is used with our Race Tools Package, it consists of a harness and water proof push button switch which allows you to limit the RPM of the bike in 1st gear while riding in the pits. You must have a Race Tool Package to use the Pit Speed Limiter Harness. The Pit Speed Limiter harness also includes a stainless steel bracket used to mount the button on the bike's switch gear. Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply). View Full Product Details...	US$26.00 ex Sales Tax VAT
2020-2024 Yamaha YZF-R1 / YZF-R1M Stock Bin File Definitions	Purchase this item to gain access in the Woolich Racing Tuned software to the stock bin files for the 2020-2024 Yamaha YZF-R1 / YZF-R1M View Full Product Details...	ex Sales Tax VAT
Universal Harness Type 3 (UH-3)	The Universal Harness Type 3 connects your Woolich Racing Log Box D-CAN to bikes with the newer red 6 pin OBD2 bike plug. View Full Product Details...	US$42.00 ex Sales Tax VAT
Yamaha Wideband O2 Installation Kit (Zeitronix)	Installation kit for fitting the Zeitronix ZT-3 Wideband O2 to relevant Yamaha models Includes: RJ12 cable for connecting ZT-3 to Woolich Racing Products Yamaha Power Harness O2 Stainless Steel Bung Adhesive Velcro for attaching ZT-3 to bike. View Full Product Details...	US$37.00 ex Sales Tax VAT
Yamaha Bench Harness Type 3 (YBH3)	The bench flashing harness allows you to flash ECUs when they are not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing USB (Mitsubishi) Interface. Note: this product requires the purchase of a Mitsubishi Interface and Bin File Definition for use with the Woolich Racing Tuned software View Full Product Details...	US$126.00 ex Sales Tax VAT
Barrel to 2 Pin Plug Bench Harness Power Supply Connector	This harness allows you to connect the 2 pin plug used on our Bench Harnesses to a 12v Power Supply with a standard 2.5mm barrel connector. View Full Product Details...	US$10.00 ex Sales Tax VAT
Yamaha Bench Harness Type 21 (YBH21)	The bench flashing harness allows you to flash 2020-2023 Yamaha YZF-R1, 2022+ MT-10 and 2021+ MT-09 ECU's on the bench. The bench flashing harness comes with a 12v plug that should be wired into a 12v power supply and needs to be used in conjunction with the Woolich Racing Log Box D-CAN Interface. Note: this product requires the purchase of Bin Files for use with the Woolich Racing Tuned software This harness should be used in conjunction with a Universal OBD2 Harness Type 1 and OBD2 Scan Tool to clear code once the ECU is back in the bike. View Full Product Details...	US$126.00 ex Sales Tax VAT
Yamaha Harness Type 7a (YH6/7/8 + YEH7a)	On Bike Harness that allows connection between Woolich Racing Log Box D-CAN v3 Interface and bike harness. Once this harness is installed it allows you to flash the ECU without pulling out the ECU. Includes: Yamaha Harness Type 7 (Main) Yamaha Harness Type 7a Extension View Full Product Details...	US$47.00 ex Sales Tax VAT
Yamaha Harness Type 4 (YH4)	On Bike Harness for Flashing 2006-2016 Yamaha R6 and 2007-2008 Yamaha R1. This harness can only be used with a Woolich Racing USB D v3 or Woolich Racing Log Box D v3. View Full Product Details...	US$47.00 ex Sales Tax VAT
Yamaha Harness Type 5 (YH5)	On Bike Harness for Flashing 2009-2014 Yamaha R1. This harness can only be used with a Woolich Racing USB D v3 or Woolich Racing Log Box D v3. View Full Product Details...	US$47.00 ex Sales Tax VAT
Yamaha Bench Harness Type 4 (YBH4)	The bench flashing harness allows you to flash ECUs when they are not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing USB Interface. Note: this product requires the purchase of an Interface and Bin File for use with the Woolich Racing Tuned software View Full Product Details...	US$101.00 ex Sales Tax VAT
Yamaha Bench Harness Type 5 (YBH5)	The bench flashing harness allows you to flash ECUs when they are not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing USB Interface. Note: this product requires the purchase of an Interface and Bin File Definition for use with the Woolich Racing Tuned software View Full Product Details...	US$101.00 ex Sales Tax VAT
Yamaha Extension Harness Type 7a (YEH7a)	The Yamaha Extension Harness Type 7a is the 4 wire extension harness that is permanently installed on the bike and connects the Yamaha Harness Type 7 main harness to the ECU. You can purchase additional Extension Harnesses to tune additional bikes. View Full Product Details...	US$26.00 ex Sales Tax VAT
Yamaha Bench Harness Type 7 (YBH7)	This bench flashing harness allows you to flash ECUs when they are not installed in the bike. The bench flashing harness comes with a 12v plug and needs to be used in conjunction with the Woolich Racing Log Box D-CAN v3 Interface. Note: this product requires the purchase of Bin Files for use with the Woolich Racing Tuned software and the Log Box D-CAN v3 interface. If using this product on a 2016+ bike you will need a OBD2 Harness and Code Reader to clear fault codes after writing. Woolich Racing have these available for purchase. View Full Product Details...	US$105.00 ex Sales Tax VAT
Yamaha O2 Eliminator Type 1	The Woolich Racing O2 Eliminator allows you to remove the O2 Sensor/s from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bikes wiring harness before the ignition is switched back on to prevent fault codes from being stored in the ECU. Supported models: - R1 2009-2014 - R6 2006-2016 View Full Product Details...	US$41.00 ex Sales Tax VAT
Yamaha O2 Eliminator Type 1 (pack of 2)	The Woolich Racing O2 Eliminator allows you to remove the O2 Sensor/s from the motorcycle. The eliminator prevents the bike from displaying the Malfunction Indicator Light (MIL) on the dash and prevents fault codes from appearing in the diagnostic system. The eliminator should be plugged into the bikes wiring harness before the ignition is switched back on to prevent fault codes from being stored in the ECU. Supported models: - R1 2015-2020 View Full Product Details...	US$72.00 ex Sales Tax VAT
Woolich Racing Merchandise


There are no products for this model, please check back soon...